The Smart Way to Weigh: Loadsense Onboard Scales for Ford F-Series Pickups

With a legendary track record of being the #1 selling pickup truck in America for 48 consecutive years, the Ford F-Series has cemented itself as a go-to choice for contractors, fleet operators, tradespeople, and off-road enthusiasts. But with great power comes great responsibility—payload management and legal compliance are critical, especially in today’s regulated road transport environment.

Whether you’re hauling tools, towing a trailer, or fully loading your bed, overloading your F-Series can lead to safety hazards, fines, and operational costs. Loadsense offers a rugged, cost-effective, and highly accurate onboard weighing system engineered to work with all F-Series models, especially those equipped with mechanical spring or air-assisted suspensions.

Why You Need a Weighing System for Your Ford F-Series

Most drivers and fleet operators overestimate payload capacity, often unknowingly breaching their Gross Vehicle Weight Rating (GVWR) or Gross Axle Weight Rating (GAWR).

Consequences of overloading include:

  • Costly DOT fines and CSA score impacts

  • Increased wear and tear on brakes and suspension

  • Insurance claim rejections

  • Poor fuel economy and drivability

  • Non-compliance with federal or provincial/state laws

With Loadsense onboard weighing, you gain real-time visibility of your vehicle’s weight—improving safety, efficiency, and compliance across all operations.

Which Ford F-Series Models Can Be Fitted?

From workhorse to luxury truck, Loadsense has a scale system that fits:

Model Suspension Type Loadsense Sensor Recommendation
F-150 XL/XLT/Lariat Leaf spring (rear), Coil (front) Spring sensors + optional front load bolts
F-150 Raptor High-performance coil-over suspension Load cells or hydraulic sensors
F-250 Super Duty Heavy-duty rear leaf springs Dual axle spring sensors
F-350 Super Duty Optional factory air-assist & reinforced leaf Spring + air pressure sensor combo
F-450/F-550 Chassis Cab Leaf or air suspension Load bolts, air sensors or custom multi-axle setup
Older Gen F-Series (pre-2015) Leaf spring (rear) Standard leaf spring compression sensors

All configurations can be equipped with wired or wireless RF display units, ensuring optimal installation based on your usage and cab layout.

Loadsense Sensor Technology

  1. Leaf Spring Compression Sensor
    Attaches easily to mechanical spring packs, perfect for typical F-150 and F-250 applications.

  2. Air Pressure Sensor
    Ideal for Super Duty trucks with airbag assist, this system reads internal pressure to determine load.

  3. Load Cell System
    Precision weighing for specialty trucks, F-450/F-550, and modified fleet setups.

  4. Load Bolt Sensor
    Installed directly into suspension pivot or chassis stress points, offering rugged long-term durability.

All systems are available in high-durability configurations, able to withstand extreme temperature, dust, mud, and road salt—ideal for the toughest environments from rural Montana to the Australian Outback.

Compliance Matters: Local Overloading Laws

🇺🇸 USA (DOT/FMCSA):
Vehicles over 10,000 lbs GVWR must comply with strict weight limits. Exceeding axle ratings can trigger out-of-service orders during roadside inspections.

🇨🇦 Canada:
Each province has individual axle weight limits. Quebec, Ontario, and Alberta conduct routine roadside weigh station checks—especially for commercial operators.

🇳🇿 New Zealand:
WorkSafe and NZTA enforce axle and GVM limits under vehicle licensing and safety legislation.

🇦🇺 Australia:
Heavy Chain of Responsibility (CoR) laws hold business owners accountable for overloading—regardless of who’s driving.

🇬🇧 UK & 🇪🇺 Europe:
DVSA in the UK and transport authorities across the EU can impose fines or immobilise vehicles for weight breaches—especially in low-emission zones or toll roads.

Avoid the headache. Install a Loadsense scale and know your weight before you roll.

Why Loadsense is the Smart Choice for F-Series Owners

  • ✅ Rugged sensor technology for North American conditions

  • ✅ Compatible with all F-150 to F-550 models

  • ✅ Real-time monitoring in cab or on mobile display

  • ✅ Cost-effective retrofits for commercial and private vehicles

  • ✅ Fleet integration available

  • ✅ Reliable wireless RF tech (not Bluetooth)

  • ✅ Local support in USA, Canada, NZ, AU, UK & EU

Let’s Weigh Your F-Series the Right Way

From weekend towing warriors to full-time contractors, Loadsense has the perfect onboard weighing solution for your Ford F-Series. Stay safe. Stay compliant. Stay in control.

📩 Contact our expert team today:
[email protected]
or
[email protected]

🌐 Visit us at www.loadsensescales.com

#FordFSeries #F150 #F250 #F350 #PickupTruckScale #DOTCompliance #OnboardWeighing #LoadsenseScales #FleetSafety #UTEWeight #LoadMonitoring #PayloadAccuracy #WorkTruckSolutions